There are 3 different versions of 123D Catch, all of them are free. You also specify the height of the emboss, just as you would for a normal extrude. 123D Catch, by Autodesk, allows you to use 2D photographs, taken at various angles, to create a 3D model that you can edit, export, and 3D print. You have to position the sketch on top of the surface, but Fusion 360 provides the usual grabber tools for moving and rotating the sketch. Start a new document in Fusion 360, then, in the ribbon at the top of the screen, choose Insert > Insert DXF. Now that we have a CAD drawing file of our Eagle BRD design, we can import that drawing into Fusion 360. To help build a model, Slicer for Fusion 360 also creates 3D instructions you can interact with. In the dialog box that appears, choose a location to save the DXF file.
Well, there’s a bit more to it than that. 123D Make: try Slicer for Fusion 360 Built upon the 123 Make technology, Slicer for Fusion 360 is a free tool to slice and convert 3D models (US site) into 2D patterns that can be cut flat. The process is now ludicrously simple compared to previous methods: select the sketch, select the curved surface and hit “OK”. of the model and insert it directly in Tinkercad, 123D Design and Meshmixer. This function will attempt to properly project (i.e., matching the curve) a sketch onto a curved surface. tinkercad import stl Start Fusion 360 Click on Create then Insert Mesh.
Now that’s changed with the introduction of an official Emboss feature. It was extremely tedious to do this type of work in Fusion 360, and the results were often crappy. Hopefully there wasn’t too much distortion. Right click on the thumbnail of the file that will be inserted. Open the design that everything will inserted into (the Assembly file). To open a file saved locally on your computer, click Open from my computer. Verify all designs have been saved, upload any designs not already uploaded. Navigate to a file listed in your cloud data and click Open to open the file. In order to truly emboss letters it was a difficult affair involving projecting individual 2D letters on a surface and manually extruding. The Open dialog box will appear showing your cloud data. However, earlier versions of Autodesk Fusion 360 did not have a decent method of doing this. A typical use is to put letters on an object. Embossing is the process of applying a sketch to a surface, either raising or lowering selected portions of that surface. While this may sound like a rather minor feature, it is a breakthrough for those who like to emboss their 3D models. “Now you can emboss like a boss, and abandon those pesky work-arounds that you were used to doing.” This month Autodesk snuck in a new sketching / design feature they call “Emboss”. Thus it’s important to read through the entire list to see what’s new on each release. Usually there are numerous changes, and it’s sometimes difficult to notice the changes that are important to you because Autodesk usually features something different. Properly embossed curved surface in Autodesk Fusion 360 Īt long last Autodesk has resolved a long-standing issue with Fusion 360: the ability to easily emboss a curved surface.Īutodesk regularly updates the cloud-based Fusion 360 system, and posts a long description of the changes made to the product.